Why Automatic Shoe Polisher with Slopes Works Best for Wheel Cleaning?

1. The Status Quo of Wheel Cleaning in Factory Workshop:

Nowadays, automatic guided vehicles, forklifts, trolleys, and electric trucks are common tools in modern workshops. They can automatically complete the tasks of goods transport, loading and unloading, warehousing, and so on. The tools greatly improve the efficiency of industrial production. However, without the help of an automatic shoe polisher, the wheel cleaning problem still gives us a headache.
AGV wheels in the driving process will constantly contact the ground, so they will be full of dust, oil, and other pollutants. This adhering dirt pollutes the workshop floor for a long time. The contaminants not only pollute the area but also affect the normal operation of the AGV. What’s worse, they can also have many bad effects on the entire production process of the product.

2. Traditional Wheel Cleaning Methods In Factories:

(1) Use Sticky Pads: The pads can absorb the debris on the AGV wheels, but there still exists residual glue, the hidden danger of winding the wheels. It needs replacing frequently, so the cost of investment is high.
(2) Laying Replaceable Floor: A Replaceable floor can prevent the debris on the AGV wheels from polluting the workshop floor. However, the cost is high, and the time and workload of replacing the floor are also significant.
(3) Manual Cleaning: Manual cleaning of  AGV wheels is currently the most common solution. Yet, the workload is large, time-consuming, and labor-intensive, with low cleaning efficiency. It is hard to clean in place, but it also needs to be cleaned frequently to ensure the degree of cleanliness.

Though these ways can solve the AGV wheel cleaning problems to some degree, they can’t effectively meet the factory’s increasing workshop cleanliness needs. That’s why we strongly recommend the wheel cleaning station with slopes for you.

3. Why can the automatic shoe polisher with slopes help with wheel cleaning?

1) The working principles of the automatic shoe polisher

A. When driving over the shoe cleaning station, the ball-type rotating brush starts moving forward and backward.

B. The soft-bristled brush produces a circular motion, effectively removing adhering dirt particles from the corresponding tread.
C. The worn dirt then collects in a sewage tank underneath the water sink.

2) The Advantages of Automatic Shoe Polishers

1)The shoe cleaning machine with slopes is suitable for cleaning forklift trucks, trolleys, logistics trucks, and swing truck wheels.
2)The sole scrubber with slopes can save manpower and material resources, with low energy consumption. You can also disinfect shoes and wheels by adding some white vinegar or baking soda to the sink.
3) The cleaning effect can reach at most 95%. For micro-particles ranging from 0.1 to 50 μm, the cleaning effect can reach 99% or higher.
4) The maximum load capacity of the shoe shiner machine is 300kg. Heavy vehicles won’t curl and deform the shoe cleaning equipment.
5) With a running life of about 1,000,000 times, the bottom shoe cleaner is cost-effective and durable.
6）The automatic shoe cleaners won’t consume too much space. Moreover, users can flexibly install the automatic boot cleaner in the entrances and exits.

4. How to get the most value from the electric shoe shiner

Clean and maintain the machine regularly, and you will extend the service life of the electric shoe polishing machine with slopes. Here are the tips for you:

1) Surface cleanup:

The cleaning is usually done after the peak of work (three times a day, at least two). First, use a water-absorbing hoover to absorb the residual dirt on the surface; Then, rinse the surface of the guide groove with a small amount of water. By the way, the water flow should be neither too large nor too small, so as not to splash the ground. Finally, wipe the edges of the machine with a soft cloth to keep it clean.

2) Sewage tank cleaning:

The sewage tank of the motorized shoe cleaners is the key cleaning area! Open the top cover, and use the hoover to suck the dust deposited in the sewage tank. If there is a small amount of stubborn silt, you can use a dust-free, damp cloth to wipe it and then rinse it with a small amount of water. After finishing the cleanup, just close the top cover. In addition, when restoring the cover, please pay attention to aligning the holes so as not to be misplaced.

3) Water absorbent pad cleaning:

2 spare pads are packed with each set of electric shoe shine polishers. You can use the absorbent cotton pad alternately. Clean up the wetter pads with clean water, then put them into the drying machine or dehydration bucket for a minute. In this way, you will find the pad dry completely. After the 1-month observation, the user can base a more appropriate cleaning cycle on their current situation.

All in all, with its remarkable advantages and regular maintenance, you will find it the best choice for muddy boot cleaning and wheel cleaning in your workshop. Come on, don’t hesitate to buy the machine for shoe care and wheel cleaning from our store. With any questions, please contact us.